Wobbel-function generator PEAKTECH 2080

Function generator:

This Wobble-Function generator provides a number of signals and can be used like a normal signal generator as well as generator for impulses, sweeping emitter and frequency counter, to generate sinus, triangle, ramp, impuls saw-tooth and DC-signals as well as TTL/CMOS levels.

frequence domain	0,02Hz-2MHz
deflection range:	1:1 bis 100:1
deflection type:	lin.
absorbability:	-20 dB
output level:	free
output voltage:	20 Vss, 10 Vss (an 50 Ω) load
output resistance:	50 Ω +/- 5%
distortion factor (sinus)	< 1% (0,2 Hz-100 kHz)
box-signal	rise-/decline time < 110 ns
TTL-output:	rise-/decline time < 40 ns

 

Frequency counter

display:	6-digit LED-display
frequency domain:	200 mHz – 50 MHz
resolution:	± 1 St.
input resolution:	100 mV
Max. input voltage:	250 Vss

 

 

Oszilloskop VOLTCRAFT 2080

Analog:	2 channels 0 - 20 MHz, max. 1 mV / cm
Time basis:	1 s - 50 ns / cm, trigger 0 - 40 MHz

 

 

1 GHz Frequency-counter ELV FZ 7000

Frequency domain:

preamplifier 1:	DC – 50 MHz
preamplifier 2:	50 MHz – 1 GHz
measurement functions:	frequency, periode, event
Torzeit:	0,01 s – 10 s / 0,1-s-steps
resolution:	8 digits
refrence frequency	internal: 16 MHz w(with Quarzofen 10 pp), external

 

Input DC – 50 MHz

sensibility	25 mV
input inpedance:	1 M II20 pF
coupling:	DC / AC
lowpass filter:	50 kHz, switchable
reducer:	20 dB, switchable

 

Input 50 MHz – 1 GHz

sensibility:	typ. 25 mV
input inpedance:	50 Ω

 

TTL-Input

frequency domain:	till 40 MHz
gauge:	TTL-compatible

 

 

(Car-) Battery charger ABSAAR Serie C 22 Amp.

charging potential :	6 V oder 12 Volt
charging current :	15 A (Normal) , 22 A (Eil)
battery capacity :	30 Ah (C.min), 180 Ah (C.R)
ignition aid :	600 Watt (180 A)

Loads a 60 Ah battery within 5 hours.

Power supply Voltcraft TNG 235

output voltage:	2 x 0 bis 30 V Gleichspannung
output current :	2x 0,02 bis max. 2,5 A
voltage stability:	ca. 0,05 %
current stability:	ca. 0,05 %
main fuse:	Träge 1,6 A / 250V
VU-meter:	2 x 0 - 30 V, Auflösung 1 V
current-meter:	2 x 0 - 2,5 A, Auflösung 0,1 A
weight:	ca. 7,5 kg

 

 

Power supply Voltcraft TYP 2223

output voltage:	0 bis 30 V DC
output current:	0,02 bis max. 2,5 A
voltage stability:	ca. 0,05 %
current stability:	ca. 0,05 %
VU-meter:	0 - 30 V, resolution 1 V
current meter:	0 - 2,5 A, resolution 0,1 A
weight:	approx. 2,5 kg

Audio Generator LEADER LAG - 26

Multimeter Völkner LDM-7S, 2 Stück verfügbar

max. voltage:	1000 V DC and 750 V AC
Basis accuracy (VDC):	+-2%
max.current:	10 A DC
max. resistance:	20 MΩ
display:	3 1/2-digit LCD-Display
domain selection:	manual
miscellaneous:	Diod-testing

Multimeter SHIMIZU Model SH - 105

max. voltage:	1200 V DC and 1200 V AC
max. current:	12 A DC
max. resistance:	10 KΩ
display:	analog
domain selection:	manual

Charger CONRAD CHARGE Manager 2000

accumulator typs:	Nickel-Cadmium- and Nickel-Metall-Hydrid-accumulators
accumulator sizes:	Lady (R1), Micro (R3), Mignon (R6), Baby (R14), Mono (R20)
Display:	two line Dot-Matrix-Display
Charging programs:	CHARGE, CHECK, CYCLE, ALIVE

• With the CHARGE-program the battery will be charged until detection of its charging-capacity.

• With the CHECK-program the battery will be discharged and then charged.

• With the CYCLE-program the battery will be charged, then discharged and than again charged. This way it is possible to determine the actual capacity.

• With the ALIVE-program the cycle of charging and discharging will be repeated up to 6 times or until detection of no possible capacity improvement. This program is used for re-activation of batteries which where not used for a long time.

• If you leave the batteries inside the charger, it will check in regular intervals the state of charge and if needed charge the battery. This is called TRICKLE-Charge.

• For NiCd-Batteries (except for the sizes micro and lady) there is beside the fast-charge program a rapid-charge program which should bisect the charging-time.

Self-made function generator

Frequency :	10 Hz - 100 kHz
wave-form	Sinus, box,trianble, ramp, TTL
Amplitude :	1 mV - 1 V
junction :	BNC

Probe HAMEG HZ36

pitching factor:	1x / 10x
bandwidth:	10 (1x), 100 MHz (10x)
capacity:	47 pF (1x), 13 pF (10x)
rise time:	35 ns (1x), 3,5 ns (10x)
input impedance:	1 MOhm (1x), 10 MOhm (10x)
max. voltage:	600 VDC

Probe ETM 2111, 2 Stück verfügbar

pitching factor:	1x / 10x
input impedance:	10 MOhm, 55pF (1x), 15,5 pF (10x)
bandwidth:	20 MHz (1x), 200 MHz (10x)
max. voltage:	600 VDC